BTBJR - 52027 SILATHANE ALKYD ENAMEL GREEN
- MSDS: BTBJR
- Manufacturer: BRUNING PAINT CO INC
- Product Name: 52027 SILATHANE ALKYD ENAMEL GREEN
- National Stock Number: 8010-00F032936
Product Identification
Product ID:52027 SILATHANE ALKYD ENAMEL GREEN
MSDS Date:03/27/1993
FSC:8010
NIIN:00F032936
MSDS Number: BTBJR
Responsible Party
BALTIMORE, MD 21224-4347
US
Emergency Phone: 301-342-3636AM/301-342-3641PM
Info Phone: 301-342-3636AM/301-342-3641PM
Cage: EO376
Contractor
Telephone: 800-368-2076
Cage: 85520
Ingredients
STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 35-50%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
3.944 LBS/GAL
RTECS: 9999999VO
7.8
RTECS: 9999999WG
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION TO MUCOUS
MEMBRANE, NOSE, THROAT, EYES; CNS DEPRESSANT, POSSIBLE
UNCONSCIOUSNESS; INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALING THE CONTENTS MAY BE HARMFUL/FATAL. CHRONIC EXPOSURE MAY
CAUSE PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, HEADACHE, INTOXICATION,
EUPHORIA.
First Aid
First Aid:EYES: FLUSH W/LUKE WARM WATER FOR 15 MINS. SKIN: FLUSH W/LUKE
WARM WATER, REMOVE CONTAMINATED CLOTHING. INHALATION: REMOVE TO
FRESH AIR, RESTORE BREATHING IF REQUIRED. INGESTION: RINSE MOUTH
IMMEDIATE LY, GIVE 6 TO 8 OZ OF LIQUID, NEVER GIVE ANYTHING BY
MOUTH IF INCONSCIOUS; DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:104F
Lower Limits:.9%
Upper Limits:7.0%
Extinguishing Media:NATIONAL FIRE PROTECTION ASSOCIATION CLASS B
EXTINGUISHER IS DESIGNED TO EXTINGUISH NFPA CLASS 1 B FLAMMABLE
LIQUID FIRE
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER FOG MAY
BE USED TO COOL CLOSED CONTAINER TO PREVENT PRESSURE
BUILDUP/POSSIBLE AUTOGNITION/EXPLOSION WHEN EXPOSED TO (SUPP)
Unusual Fire/Explosion Hazard:CLOSED CONTAINER MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:STOP/CONTAIN DISCHARGE IF IT MAY BE DONE
SAFETY. KEEP ALL SOURCES OF IGNITION ARAY. VENTILATE AREA OF SPILL.
USE NON-SPARKING TOOLS FOR CLEANUP. COVER W/INERT MATERIAL TO
REDUCE FUMES. KEEP OUT OF DRA INS. SEWERS, OR WATERWAYS.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED WHEN NOT
IN USE. USE ONLY W/ADEQUATE VENTILATION. DON'T CUT/PUNCTURE
CONTAINER. DON'T WELD NEAR CONTAINER.
Other Precautions:ROUND CONTAINERS WHEN POURING & LIMIT FREE FALL TO A
FEW INCHES TO REVENT STATIC SPARKS. AVOID SPONTANEOUS COMBUSTION OF
CONTAMINATED RAGS OR EASILY IGNITABLE ORGANTIC MATERIALS BY
IMMEDIATE IMMERSION IN WATER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVAL MECHANICAL FILTER
Ventilation:GENERAL DILUTION/LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING IMMEDIATELY &
DON'T WEAR IT UNTIL IT HAS BEEN PROPERLY LAUNDERED.
Supplemental Safety and Health
CON'T ON UNUSAL FIRE: DON'T APPLY TO HOT SURFACES. NEVER USE
WELDING/CUTTING TORCH ON/NEAR CONTAINER. PRODUCT MAY IGNITE
EXPLOSIVELY.
Chemical Properties
Boiling Pt:B.P. Text:300-388F
Vapor Pres:2.00
Vapor Density:> THAN 1
Evaporation Rate & Reference:SLOWER THAN BU AC
Percent Volatiles by Volume:61.46
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:SPARK, OPEN FLAME, HOT SURFACES, ALL
SOURCES OF HEAT/IGNITION.
Disposal
Waste Disposal Methods:DON'T FLUSH TO SEWER, WATERSHED, OR WATERWAY.
DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
DON'T INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.